For Network Users - Brother MFC-5440CN Quick Setup Manual

■ For Network Users

This section is for using the machine on a network.
An administrator should set up the machine using the following steps.
Installing the BRAdmin Professional
Configuration Utility (Windows
The BRAdmin Professional utility is designed to manage your Brother network connected
devices such as network-ready Multifunction devices and/or network-ready printers in a Local
Area Network (LAN) environment.
BRAdmin Professional can also be used to manage devices from other manufacturers whose
products support SNMP (Simple Network Management Protocol).
For more information on BRAdmin Professional go to http://solutions.brother.com
1
Insert the supplied CD-ROM into your CD-ROM drive.
The opening screen will appear automatically.
Follow the on-screen instructions.
2
Click the Install Optional Applications icon on the main menu screen.
3
Click BRAdmin Professional and follow the on-screen instructions.
The default password for the print server is "access". You can use BRAdmin Professional to change this
password.
Setting your IP Address, Subnet Mask and
Gateway using BRAdmin Professional
(Windows
1
Start BRAdmin Professional, and select TCP/IP.
2
Select Search Active Devices from the Devices menu.
BRAdmin will search for new devices automatically.
3
Double-click the new device.
4
Enter the IP Address, Subnet Mask and Gateway, and then click the OK button.
5
The address information will be saved to the machine.
The default password for the print server is "access". You can use BRAdmin Professional to change this
password.
16
®
only)
®
only)