Colour Enhancement - Brother DCP-120C Software User's Manual

Colour Enhancement

This feature analyzes your image to improve sharpness, white balance and colour density. This process may
take several minutes depending on the size of the image and the specifications of your PC.
Colour Density
Adjusts the total amount of colour in the image. You can increase or decrease the amount of colour in an
image to improve a washed out or weak looking picture.
White Balance
Adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect
the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour.
By adjusting the white balance you can bring the white areas back to pure white.
Sharpness
Enhances the detail of an image, similar to adjusting the fine focus on a camera. If the image is not in true
focus and you cannot see the fine details of the picture, then adjust the sharpness.
Auto Image Enhance
Allows alteration of individual picture settings to improve the printed image and analyzes data from
surrounding or neighboring pixels in the document.
Brightness
Adjusts the brightness of the whole image. To lighten or darken the image, move the scroll bar to the left
or right.
Contrast
Adjusts the contrast of an image. This will make darker areas darker and lighter areas lighter. Increase the
contrast when you want an image to be clearer. Decrease the contrast when you want an image to be more
subdued.
Red
Increases the intensity of Red in the image to make the image redder.
Green
Increases the intensity of Green in the image to make the image greener.
Printing
1 - 8