Configuring Network Scanning - Brother DCP-120C Software User's Manual

Configuring Network Scanning

If you need to change the machine that was registered to your PC during the installation of MFL-Pro Suite
(see the Quick Setup Guide), follow the steps below.
a ®
For Windows XP, click the Start button, Control Panel, Printers and Other Hardware, then
Scanners and Cameras (or Control Panel, Scanners and Cameras).
®
For Windows 98/Me/2000, click the Start button, Control Panel, then Scanners and Cameras.
b
Right-click the Scanner Device icon and choose properties.
The Network Scanner Properties dialog box appears.
c
Click the Network Setting tab and choose a method to specify a machine as a network scanner for your
PC.
Specify your machine by address
1
Enter IP address of the machine in IP Address, and then click Apply.
Network Scanning (For models with network support as standard)
4 - 2