Photocapture Center; For Usb Cable Users - Brother DCP-120C Software User's Manual

Note
• To save a setting, highlight the setting (for example, Set Quick-Dial) from the setting list then click Export.
Each setting you export is saved as a single file.
• If you need to change the machine that was registered to your Macintosh
Pro Suite (see the Quick Setup Guide), or if the network environment was changed, you need to specify
the new machine. Open the DeviceSelector and choose the new machine. (For network users only)

PhotoCapture Center™

You can access a Media Card put into the machine from a Macintosh
CAUTION
DO NOT start your Macintosh
your data or damage the card.

For USB cable users

®
a
Put a SmartMedia
SecureDigital™ or xD-Picture Card™
1
This product also supports CompactFlash
2
MagicGate Memory Stick
Note
If you create a name for the volume level of the media card, the name appears instead of
'Removable Disk'.
b
Double-click the Removable Disk icon. The files and folders on the media card appear on your screen.
®
with a media card put in the media drive of the machine. You could lose
® 1
, CompactFlash , Memory Stick
1
into your machine.
®
type1 and xD-Picture Card™ type M (Large Capacity).
®
and Memory Stick Pro™ can be used, but any music data that is stored on the stick cannot be read.
Remote Setup & PhotoCapture Center™
®
during the installation of MFL-
®
.
® 2
, Memory Stick Pro™, MultiMediaCard™,
12 - 2