Before Using Network Scanning; Network License - Brother DCP-120C Software User's Manual

Network Scanning
4
(For models with network support as
standard)
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel (See the Network User's Guide on the CD-ROM).
If you installed the machine following the instructions for a network user in the Quick Setup Guide then the
machine should already be configured for your network.
Note
• A max. of 25 clients can be connected to one machine on a network. For example, if 30 clients try to
connect at a time, 5 of those clients will not be shown on the LCD.
• To use Network Scanning with Windows
must be excluded from the firewall setting. See Troubleshooting and Maintenance of the User's Guide or
visit the Solutions Center (http://solutions.brother.com) for more information.

Before using Network Scanning

Network license

This product includes a PC license for up to 2 Users.
This license supports the installation of the MFL-Pro Software Suite including ScanSoft
to 2 PC's for use on a network.
If you want to use more than 2 PCs with ScanSoft
PC license agreement pack for up to 5 additional users. To buy NL-5, contact your Brother Sales Office.
®
XP that is protected by the firewall, Network Scanning program
® ®
PaperPort installed, please buy NL-5 which is a multiple
® ®
PaperPort on up
4 - 1