Colour Enhancement - Brother MFC-J625DW Advanced User's Manual

Printing photos from a memory card or USB Flash memory drive (MFC-J625DW and DCP-J725DW only)
e
Press d or c to change the contrast.
Press OK.
f
If you do not want to change additional
settings, press
Press Start to print.

Colour Enhancement

You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower with this feature and also,
depending on the image you are printing, it
may use more ink.
a
Press (PHOTO) or Photo.
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
 Press Print All.
b
Press Options.
c
Press s or t to display
Color Enhance.
d
Press Color Enhance.
e
Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Color Density, press
Color Enhance and then press
On.
Go to step f.
 If you do not want to customize,
press Color Enhance and then
press Off.
Press .
Go to step i.
f
Press s or t to display
White Balance, Sharpness or
Color Density, and then press the
option you want to change.
.
8
g
Press d or c to adjust the degree of the
setting.
Press OK.
h
Do one of the following:
 If you want to customize another
colour enhancement, repeat
steps f to g.
Press .
 If you want to change other settings,
press to display the print setting
menu and press the setting you want
to change. (See page 43.)
i
If you do not want to change additional
settings, press
Press Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.
.
45
8