Colour Enhancement - Brother MFC-J4510DW Advanced User's Manual

Chapter 8
Contrast
You can choose the contrast setting.
Increasing the contrast will make an image
look sharper and more vivid.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Contrast.
j
Press Contrast.
k
Adjust the level of contrast by pressing it
on the Touchscreen.
l
If you do not want to change additional
settings, press
Press Start to print.
60
8
or OK.

Colour Enhancement

You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower with this feature and also,
depending on the image you are printing, it
may use more ink.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Colour Enhance.
j
Press Colour Enhance.
k
Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Colour Density, press
Colour Enhance and then press
On.
Go to step l.
 If you do not want to customize,
press Colour Enhance and then
press Off.
Press .
Go to step o.
l
Press White Balance, Sharpness or
Colour Density.
8