Table of Contents
Advertisement
Setup Mail TX (Transmit)
This menu has three selections: Sender Subject, Size Limit and
Notification.
Sender Subject
This field displays the subject that is attached to the Internet Fax data
being sent from the Brother machine to a PC (default is "Internet
Fax Job").
1
Menu/Set
Press
4
1 for
,
FAX-1940CN/MFC-5440CN)
2
1
Select
to change the Sender Subject—OR—
3
Enter the subject information (up to 40 characters).
4
Menu/Set
Press
5
Stop/Exit
Press
Size Limit
Some E-mail servers do not allow you to send large E-mail
documents. The machine may display Out of Memory when trying
to send E-mail documents (the System Administrator will often place
a limit on the maximum E-mail size). With this function enabled, the
machine will display Out of Memory when trying to send E-mail
documents over 1Mbyte in size. The document will not be sent and
an error report will be printed. The document you are sending should
be separated into smaller documents that will be accepted by the
mail server (default is Off). (Ex. A 42 page document of the ITU-T
Test Chart#1 test chart is approximately 1Mbyte in size).
1
Menu/Set
Press
4
2 for
,
FAX-1940CN/MFC-5440CN)
2
Press
or
3
Menu/Set
Press
4
Stop/Exit
Press
5
4
1
,
,
,
for MFC-3340CN/MFC-5840CN. (
.
.
5
4
2
,
,
,
for MFC-3340CN/MFC-5840CN. (
to select On or Off.
.
.
CONTROL PANEL SETUP 1 - 16
4
,
2
to exit.
4
,
Advertisement
Table of Contents
