Table of Contents
Advertisement
Clamp Mounting
This fixture provides a mounting bracket assembly that secures the bottom
base, mounting brackets, and safety cable rigging point together. When
mounting to truss, be sure to use an appropriately rated clamp fitted through
the center hole of the mounting bracket.
Securing the Fixture
Regardless of the rigging option you choose for your fixtures, always be sure
to secure them with a safety cable. Be sure to use the designated rigging point
found on the underside of the base assembly for the safety cable.
1.
Attach clamps to both brackets through the hole in the bracket.
2.
Fasten the mounting brackets to the base by inserting the quick-lock
fasteners into the holes, and turn them clockwise to tighten.
3.
Hang the fixture using the clamps and tighten. Fasten a safety cable
through the bottom of the base, and over the support.
Torrent™ Keyframe 600 - Rev. A
1.) Clamp
2.) Mounting bracket
3.) ¼ Turn quick lock fasteners
Page 9
© 2021 Blizzard Lighting, LLC
Advertisement
Table of Contents
