Part 4: How To Use - Modena Veloce Series User Manual Book

Warning! Metallic / chromed hose and conductive control valve shall not be used.
POWER SUPPLY CONNECTION
1. Adjust power selection knob to "OFF".
2. Choose circuit breaker (such as Miniature Circuit Breaker/MCB) with leakage protection according
to power of the water heater.
3. When connecting the water heater to electric network, please pay attention to connect the live line
(red/brown), the neutral line (blue) and the earth line (yellow/green) with corresponding to the line
in electric network.
WATER SUPPLY
After all the process of the plumbing connection is finished, open the water inlet valve of the product
and supply the unit with the water to drain away the air inside until there is the stable water flow
comes out from the shower head. Check whether there is leakage at the joints (connection) or not. If
there is, check whether the connecting parts are fastened or not, then re-supply water.
DISPLAY SCREEN FUNCTION (EI 2D B only)

Part 4: How to Use

8