Fax Redial; How To Fax; Automatic Transmission - Brother FAX-817 Series User Manual

Fax Redial

If you are sending a fax manually and the line is busy, press
Redial/Pause, and then press Fax Start to try again. If you want
to make a second call to the last number dialled, you can save time
by pressing Redial/Pause and Fax Start.
Redial/Pause only works if you dialled from the control panel.
If you are sending a fax automatically and the line is busy, the fax
machine will automatically redial three times at five minute
intervals.

How to fax

Automatic transmission

This is the easiest way to send a fax. Documents must be between
150 and 600 mm long and between 148 and 216 mm wide,
regardless of the paper width.
IMPORTANT: Do not pick up the handset or press
Speaker Phone (FAX-837MC only).
1
Insert the document face down, top edge first in the Automatic
Document Feeder (ADF).
2
Adjust the paper guides to fit the width of your document.
Paper Guides
3
Enter the fax number using One-Touch, Speed-Dial, Search
or the dial pad. (See One-Touch dialling on page 6-1,
Speed-dialling, page 6-1 and Search on page 6-1.)
4
Press Fax Start.
Do not use paper that is curled, wrinkled, folded, ripped,
stapled, paper clipped, pasted, or taped.
Do not use cardboard, newspaper or fabric.
The ADF can hold up to 10 pages, feeding each one
individually through the fax machine. Use standard 64 g/m
2
90 g/m paper when using the ADF; if you are using heavier
paper, feed each sheet individually to prevent paper jams.
6 - 2
Setup Send
2
-