Table of Contents
Advertisement
Available languages
Available languages
V 3.02
5 Gallon Siphon-Fed
Abrasive Blaster
SPECIFICATIONS
Air Consumption
Operating Pressure
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and / or damage to the equipment. Before
allowing someone else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. Common sense and caution are factors
that cannot be built into this product, but must be supplied by the operator.
NOTE: Keep this manual for the safety warnings, precautions and operating, inspection and
maintenance instructions. When this manual refers to a part number, it refers to the included parts list.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean and well lit.
2.
Do not use in the presence of flammable gases or liquids.
3.
Keep anyone not wearing the appropriate safety equipment away from the work area.
NOTE: Minimize distractions in the work environment. Distractions can cause you to lose
control of the tool.
4.
Store tool properly in a safe and dry location to prevent rust or damage.
5.
Always lock up tools and keep them out of the reach of children.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI) when using the tool.
1.
Dress properly; wear protective equipment. Use breathing, ear, eye, face, foot, hand and head
protection. Always wear ANSI approved impact safety goggles, which must provide both
frontal and side protection. Protect your hands with suitable gloves. Wear a full face shield
if your work creates metal filings or wood chips. Protect your head from falling objects by
wearing a hard hat. Wear an ANSI approved dust mask or respirator when working around
metal, wood and chemical dusts and mists. Wear ANSI approved earplugs. Protective,
2
5.8 CFM @ 90 PSI
65 to 125 PSI
For technical questions call: 1-800-665-8685
8012660
Advertisement
Table of Contents
