Table of Contents
Advertisement
Available languages
Available languages
8012660
1.
Mineral: Sand or silica, garnet, magnesium sulphate.
NOTE: Sand should be avoided, as there are other abrasives that perform the same
or better without the detrimental health effects.
2.
Organic: Crushed nutshells.
3.
Synthetic: Baking soda, grain starch.
4.
Engineered: Aluminum oxide, glass beads.
5.
Metal: Shot or grit made from steel, copper, aluminum or zinc.
NOTE: Store abrasive in a dry location. Wet abrasive will clog the unit.
UNPACKING
1.
Carefully remove the product from the package.
a.
Retain packing material until you have carefully inspected and satisfactorily installed or
operated the product.
2.
Inspect the parts carefully to make sure the product was not damaged while shipping.
ASSEMBLY
1.
Connect each leg (3) to the plastic hopper bucket (2) with two 1/4 in. x 5/8 in. connecting
plate lock screws (4) and secure on the inside of the bucket with the 1/4 in. nuts (8).
See figure 1.
2.
Screw the 1/2 in. connector (11) into the bottom of the plastic hopper bucket (2) until snug.
3.
Attach the leg connecting braces (6) to each leg (3) and secure with the 1/4 in. x 3/4 in. leg
lock screws (6) and the 1/4 in. nuts (8). See figure 2.
Visit www.princessauto.com for more information
5 Gallon Siphon-Fed Abrasive Blaster
V 3.02
5
Advertisement
Table of Contents
