Table of Contents
Advertisement
Available languages
Available languages
V 3.02
a.
Never carry the tool by the airline.
b.
Keep the airline behind the tool and out of the tool's work path.
c.
Keep the airline away from heat, oil, sharp edges or moving parts.
d.
Do not wrap the airline around the tool as sharp edges may pierce or crack the airline. Coil
the airline when storing.
5.
A damaged or disconnected airline under pressure may whip around and inflict personal
injury or damage the work area. Secure the compressor's airline to a fixed or permanent
structure with clamps or cable ties.
6.
Install an in-line shutoff valve or regulator to allow immediate control over the air supply in
an emergency, even if a hose is ruptured.
TOOL USE AND CARE
WARNING! Do not use the tool if the trigger or ON / OFF switch does not function properly. Any tool
that cannot be controlled with the ON / OFF switch is dangerous and must be repaired.
1.
Use the correct tool for the job. Maximize tool performance and safety by using the tool for
its intended task.
2.
Do not modify this tool or use for a purpose for which it was not designed.
3.
This tool / device was designed for a specific function.
Do Not:
a.
Modify or alter the tool; all parts and accessories are designed with built-it safety
features that may be compromised if altered.
b.
Use the tool in a way for which it was not designed.
4.
Avoid unintentional starts. Be sure the trigger is in the neutral position when not in use and
before connecting it to any air source.
5.
Maintain the tool with care (see Maintenance).
ABRASIVE BLASTING MEDIA
There are a number of different abrasive media the tool can use as an abrasive. Each type of abrasive
has a different application and effect on the object being blasted. Each abrasive may also have hazards
or health issues associated with their use.
NOTE: Read the abrasive blasting media precautions section before use and consult the Material Safety
Data Sheet for each abrasive media product.
Recommended Abrasive Blasting Media:
1.
Aluminum Oxide
2.
Glass Bead
3.
Steel Shot
4.
Copper Slag
Not Recommended Abrasive Blasting Media:
These blasting medias clog easier and require different nozzles and higher pressures.
1.
Baking soda, grain starch
2.
Crushed nutshells
Material types:
4
5 Gallon Siphon-Fed Abrasive Blaster
For technical questions call: 1-800-665-8685
8012660
Advertisement
Table of Contents
