10. Remote Fax Options; Setting Up Fax Storage - Brother LaserFax IntelliFAX 3550 Owner's Manual

REMOTE FAX OPTIONS
10. REMOTE FAX OPTIONS __ .......
Since the machine can store incoming data as well as print it, you can use the convenmnt FAX
Forwarding, Paging and Remote Retrieval functions.
Setting Up Fax Storage
Set this function to "ON" if you want the incoming data to be stored in the memory as well as
printed. Since the data can be stored in the memory, you can use the Fax Forwarding, Paging,
and Remote Retrieval functions. It is a good idea to set the Fax Storage function to "ON" when
you go out. The initial setting is OFF.
1. Press
Function.
2. Press
8.
3. Press 1.
4. Press ---I (left arrow) or _ Lright
arrow) to select ON or OFF.
Example: ON
5. Press Set.
6. Press Stop to exit.
m!" 14 _ _']'JIr.,_'&v, vjI I !,'] -" [elV,.._
[" 09/12/1996 15:25 )
( 8.REMOT_E FAX OPT )
( 1. FAX
STORAGE
)
((
FAX STORAGE:OFF
))
(, SELECT ÷ + & SET ]
FAX STORAGE:ON )
( 1.FAX STORAGE )
FOR YOUR INFORMATION
• When you have FAX STORAGE:ON, your incoming faxes will be stored in the
memory and the LCD will show the number of incoming calls:
( F A X
i N H+E_+fiV+.-O*]: +]
• When you want to change the Fax Storage setting from ON to OFF and there is
fax data still in the memory, you will get the following message after you select
OFF:
(( ERASE At_, F AX? )
( 1.CLEAR 2.EXIT )--"
If you select 1 you will erase all the fax data in the memory and the function will be
set to OFF. If you press 2, the data will not be erased, and the setting will remain ON.
I II IIIIIIIIIIIIIIII II II I
10-1