Cellular Modem Modules
6.5 RUGGEDCOM RX1500PN LM W32
1.
2.
3.
Technical Specifications
General
Services
Region
Connector
Antennas
SIM
Power Consumption
144
Mount the antenna to a pole or wall in an area that provides good signal
coverage and is away from any signal noise emanating from other
communications equipment.
Using shielded coaxial cables, connect the antenna to the lightning protector.
Make sure the cables are routed away from any noise sources, such as Switch-
Mode Power Supplies (SMPS).
1
2
RUGGEDCOM RX1500
1
Shielded Coaxial Cable
2
Lightning Protector
3
Antenna
4
Figure 6.15
Antenna and Lightning Protector Assembly
Connect the lightning protector to the appropriate antenna port on the module.
•
For a primary GSM/EDGE/HSPA+ antenna, connect the cable to the ANT1
port
•
For a primary EVDO Rev A antenna, connect the cable to the ANT 2 port
•
For a GSM/EDGE/HSPA+ diversity (secondary) antenna, connect the cable to
the RX DIV 1 port
•
For a EVDO Rev A diversity (secondary) antenna, connect the cable to the RX
DIV 2 port
3
2
GSM/EDGE/HSPA+ and EVDO Rev. A
North America (AT&T and Verizon)
50 Ω SMA
1 x GSM/EDGE/HSPA+, 1 x EVDO Rev A, 2 x Receive Diversity
(Secondary)
Dual Mini-SIM (2FF)
7 W
4
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16