Fiber Optic Ethernet Modules
4.7 RUGGEDCOM RX1500PN LM FX51
4.7
RUGGEDCOM RX1500PN LM FX51
The RUGGEDCOM RX1500PN LM FX51 module features two 10/100Base-FX fiber
optic Ethernet ports.
Note
When connecting cables, make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
Description
1
2
Figure 4.7
Ethernet Ports
Port LEDs
Installing the Module
For information about installing this module, refer to the Installation Manual for the
host device.
Technical Specifications
General
Interface/Cable
82
1
2
Ethernet Ports
Port LEDs
RUGGEDCOM RX1500PN LM FX51
Fixed 10/100Base-TX copper RJ45 Ethernet ports.
Each port set (transmit/receive) features a dedicated LED that indicates its
link/activity state.
Green (Solid)
Green (Blinking)
Off
State
Power Consumption
Cable Type
Speed
Mode
Interface
Description
Link established
Activity
No link detected
5 W
50/125 μm
62.5/125 μm
100 Mbps
MM (Multi-Mode)
FX
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16