Ruggedcom Rx1500Pn Lm D02 - Siemens SIMATIC NET RX1500 Manual

5.6

RUGGEDCOM RX1500PN LM D02

The RUGGEDCOM RX1500PN LM D02 module features a single Digital Data Services
(DDS) port that supports line rates of 56 kbps (Master/Slave) and 64 kbps (Slave).
Note
This module is not RoHS certified. It must be purchased separately from any
RUGGEDCOM RX1500 series device.
Any RUGGEDCOM RX1500 series device equipped with this module does not meet
the requirements for a CE declaration of conformity.
Description
1
2
3
Figure 5.12
DDS Ports
Port LEDs
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16
1 2
3
DDS Port
TX LED
RX LED
RUGGEDCOM RX1500PN LM D02
Fixed DDS RJ48S port.
LEDs indicate the link/activity state of the port.
LED State
Rx Green
Rx Yellow
Rx Red
Rx Off
Tx Green
Tx Yellow
Tx Red
Tx Off
5.6 RUGGEDCOM RX1500PN LM D02
Description
Connection established
The interface is receiving an OOF (Out of
Frame) alarm.
The interface is receiving an ALOS (Alarm
Loss of Signal) or Red alarm (e.g. corruption
or loss of signal, connectivity loss, or no
knowledge of connectivity).
The interface is disabled.
Connection established
The interface is in loopback mode.
The interface is receiving or transmitting an
RAI (Remote Alarm Indication) or AIS (Alarm
Indication Signal) alarm.
The interface is disabled.
WAN Modules
105