Ruggedcom Rx1500Pn Lm Ape1404Ckp (Obsolete) - Siemens SIMATIC NET RX1500 Manual

7.6

RUGGEDCOM RX1500PN LM APE1404CKP (Obsolete)

The RUGGEDCOM RX1500PN LM APE1404CKP module is a 32-bit computer with
Check Point GAiA™ OS pre-installed and a 16 GB solid-state drive.
LEDs
The module features the following LEDs:
1
2
3
4
5
6
Figure 7.6
HDD LED
PWR LED
RESET Button
USB Ports
ETH Port
DVI-D Video Port
Installing the Module
For information about installing this module, refer to the Installation Manual for the
host device.
Rebooting/Powering Down the Module
Each RUGGEDCOM APE module is powered on automatically when power is supplied
to the chassis, but can be powered down independently using the Power button.
This button also allows users to reboot the module.
Whenever possible, power down or reboot the RUGGEDCOM APE through the
RUGGEDCOM RX1500 operating system instead of forcing a shutdown or reboot
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16
1
2 3 4 5
HDD LED
PWR LED
RESET Button
USB Port
ETH Port
DVI-D Video Port
RUGGEDCOM RX1500PN LM APE1404CKP
Indicates when the module is active.
Indicates when the module is powered on.
Reboots/resets the module.
USB ports for connecting accessories, such as storage media, a mouse, a
keyboard, etc.
An RJ45 Gigabit Ethernet (GbE) port.
A display port for connecting a monitor.
NOTICE
7.6 RUGGEDCOM RX1500PN LM APE1404CKP (Obsolete)
6
RUGGEDCOM APE Modules
201