Opex Sure Sort Operator's Manual page 6

EU Declaration of Conformity
1.0 Manufacturer
2.0 Technical File
3.0 Description and
identification
4.0 Directives
5.0 Harmonized
Standards used
6.0 Technical
Standards used
7.0 Approval
EU Declaration of Conformity
EU Declaration of Conformity
Sure Sort
This declaration of conformity is issued under the sole responsibility of the manufacturer.
NAME
ADDRESS
Technical documentation is compiled in accordance with Part B of Annex VII of the machinery directive. This documentation is available on a
reasoned request by appropriate national authority to our authorized representative:
NAME
ADDRESS
Description
Model
Serial Number
Year Manufactured
2006/42/EC
2014/53/EU
2014/30/EU
EN 61000-6-2: 2005
EN 61000-6-4: 2011
EN 619: 2002+A1:2010
EN ISO 12100-2:2003
EN 60204-1:2006+A1:2009
ETSI EN 300 328 V2.1.1 (2016-11)
ETSI EN 301 489-1 V1.9.2 (2011-09)
NFPA 79:2018
UL 2011:2006
CSA C22.2 No. 301-2016
UL 61800-5-1 (iBOT only)
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).
Place of issue
Date of issue
Authorized
Title
Sure Sort™ Operator Manual
OPEX Corporation
OPEX Corporation
305 Commerce Drive, Moorestown, NJ 08057, USA
Andre Bernhardt
Auf der Lug 8
71726 Benningen am Neckar
Item Sorter
Sure Sort
From 2019
Machinery Directive
Radio Equipment Directive
Electromagnetic Compatibility Directive
Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial
environments
Continuous handling equipment and systems. Safety and EMC requirements for equipment for
mechanical handling of unit loads
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles
Safety of machinery. Electrical equipment of machines. General requirements
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band
and using wide band modulation techniques; Harmonised Standard covering the essential
requirements of article 3.2 of Directive 2014/53/EU
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements
Electrical Standard for Industrial Machinery
Outline of Investigation for Factory Automation Equipment
Industrial electrical machinery
Standard for Adjustable Speed Electrical Power Drive Systems: Safety requirements – Electrical,
Thermal and Energy
Moorestown, NJ, USA
Feb 19, 2019
Scott Maurer,
President, International Division
3