Processor And Heatsink; Prepare The System; Esd Precautions - Supermicro SuperServer 620P-TR User Manual

3.3 Processor and Heatsink

Prepare the system for processor and heatsink installation or removal. Follow the static-
sensitive device precautions when working with the processor and heatsink.

Prepare the System

1. Remove power from the system.
2. Remove the chassis cover and any components that are obstructing the CPU socket.
3. Check that the plastic protective cover is on the CPU socket and that none of the socket
pins are bent. If they are, contact your retailer.
4. Refer to the Supermicro website for updates on processor and memory support.
Note: All graphics in this manual are for illustration only. Your components may look different.

ESD Precautions

Electrostatic Discharge (ESD) can damage electronic com ponents. Handle the motherboard
carefully. The following measures are generally sufficient to protect your equipment from ESD.
•
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing the motherboard from the antistatic bag.
•
Handle the motherboard by its edges only; do not touch its components, peripheral chips,
memory modules or gold contacts.
•
When handling chips or modules, avoid touching their pins.
•
When handling the processor, avoid touching or placing direct pressure on the LGA lands
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or the socket, and may require manufacturer repairs.
•
Put the motherboard and peripherals back into their antistatic bags when not in use.
•
For grounding purposes, make sure that your computer chassis provides excellent conduc-
tivity between the power supply, the case, the mounting fasteners and the motherboard.
•
Use only the correct type of onboard CMOS battery. Do not install the onboard battery
upside down to avoid possible explosion.
Chapter 3: Maintenance and Component Installation
27