Table of Contents
Advertisement
2.5 Installing the Chassis into a Rack
1. Extend the outer rails as illustrated below.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides. When
the chassis has been pushed completely into the rack, it should click into the locked
position.
F.
4. Optional screws may be used to secure the front of the chassis to the rack.
Note: The figure above is for illustration purposes only. Always install servers to the bottom
SCREW
of the rack first.
1
Slide rail mounted equipment is not to be used as a shelf or a work space.
Figure 2-4. Installing the Server into the Rack
Chapter 2: Server Installation
24
Advertisement
Table of Contents
Troubleshooting
