Table of Contents
Advertisement
en Troubleshooting
Tilt the condensate trough upwards and remove it.
6.
Clean the door panels with glass cleaner and a soft
7.
cloth. Clean the condensate trough with a cloth and
hot soapy water.
Refitting the door panels
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Note: You cannot use your appliance again until the
panels have been correctly fitted.
Open the appliance door fully.
1.
Refit the condensation trough. To do this, insert the
2.
condensate trough from above and rotate it down-
wards
.
13 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
20
Slide in the inner panel
3.
When doing this, ensure that the glossy side of the
panel is on the outside and the cut-outs on the left
and right are at the top.
The panel must be sitting correctly at the bottom in
the retainer.
Push the inner panel in at the top
4.
Put the cover back in place and press on it until you
5.
hear it click into place
Open the appliance door fully.
6.
Close the two locking levers on the left and right
7.
Close the appliance door.
8.
If the appliance is defective, call Customer Service.
▶
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
.
.
.
.
Advertisement
Table of Contents
