Troubleshooting - Siemens CD714GX 1 Series User Manual And Installation Instructions

Table of Contents

Advertisement

en Troubleshooting
Slide in the inner panel
3.
When doing this, ensure that the smooth, glossy
side of the panel is on the outside and the cut-outs
on the left and right are at the top.
The panel must be sitting correctly at the bottom in
the retainer.
16  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
16.1 Malfunctions
Fault
The appliance is not
working.
Appliance is switched
on but controls not
responding;
ap-
pears on the display.
22
⁠ .
Cause and troubleshooting
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
Childproof lock is activated.
Press and hold the
Push the inner panel in at the top
4.
Put the cover back in place and press on it until you
5.
hear it click into place
Open the appliance door fully.
6.
Close the two locking levers on the left and right
7.
Close the appliance door.
8.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
⁠   button until
goes out on the display.
⁠ .
⁠ .
⁠ .

Advertisement

Table of Contents
loading

Table of Contents