Table of Contents
Advertisement
7.6 Refilling the water tank
If the water tank runs dry during operation, steaming
will be paused.
Open the appliance door carefully.
1.
Remove the water tank from the tank recess.
2.
Fill the water tank with water.
3.
Slot the full water tank back into the water tank re-
4.
cess.
Close the appliance door.
5.
Press
to resume operation.
6.
7.7 Setting the heating function and
temperature
When you switch on your appliance, the display will
suggest a heating function and temperature. If you wish
to use the suggested setting, you can start the appli-
ance immediately by pressing
use a different setting, you will need to change the val-
ues.
Requirement: The water tank contains sufficient water.
Press
to switch the appliance on.
1.
Use the rotary selector to select the required heat-
2.
ing function.
Press the button to switch to the temperature.
3.
Use the rotary selector to select the required tem-
4.
perature.
Press
.
5.
a The appliance will now start.
8 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
8.1 Overview of the time-setting options
You can set a cooking time and an end time on the ap-
pliance. When you set a time on the timer, the timer will
run independently of the appliance and will not inter-
vene in its operation.
Time-setting op-
Use
tion
Timer
When you set a time on the timer,
the timer will run independently of
the appliance and will not inter-
vene in its operation. It does not
affect the appliance.
Cooking time
If you set a cooking time, the ap-
pliance will stop heating automat-
ically once this time has elapsed.
End time
Along with the cooking time (dura-
tion), you can set the time at
which you want cooking to end.
The appliance will start up auto-
matically so that it finishes cook-
ing at the required time.
. If you wish to
7.8 "Fill water tank" message
If you select a heating function and the water tank is
only half full, the appliance will display the message
"Fill water tank".
If the water tank contains sufficient water for cooking,
start the appliance.
If the water tank does not contain sufficient water for
cooking, fill the water tank.
→ "Filling the water tank", Page 10
7.9 Cancelling operation
Note: You cannot abort the descaling process.
Press
to switch the appliance off.
▶
a This will stop the appliance.
a The fan may continue to run after operation has
been paused or stopped.
7.10 After using the Steam function
When you use the appliance, moisture and food rem-
nants remain in the cooking compartment afterwards.
Dry and clean the appliance after each use. Empty the
water tank.
After using the Steam function
Dry the cooking compartment.
1.
→ "Drying the cooking compartment", Page 17
Empty the water tank.
2.
→ "Emptying the water tank", Page 17
8.2 Setting the timer
The timer runs independently of the appliance and
does not intervene in its operation. You can set the
timer to times of up to 23 hours and 59 minutes, re-
gardless of whether the appliance is on or off. The
timer has its own audible signal so that you can tell
whether it is the timer or a cooking time that has
elapsed.
Press
.
1.
Use the rotary selector to set the timer duration.
2.
a The timer will start after a few seconds.
a In the status bar, you will see the
time as it counts down.
a Once the set time has elapsed, an audible signal
will sound. "Timer finished" will appear on the dis-
play.
Press the
button to silence the audible signal be-
3.
fore it is due to end.
Changing the timer
You can change the timer duration at any time.
Press
.
1.
Use the rotary selector to change the timer duration.
2.
Press
to confirm.
3.
Cancelling the timer
You can cancel the timer duration at any time.
Press
.
1.
Use the rotary selector to reset the timer duration to
2.
zero.
Time-setting options en
symbol and the
11
Advertisement
Table of Contents
