Table of Contents
Advertisement
en Dishes
Press
to confirm.
3.
8.3 Setting the cooking time
Once the set cooking time has elapsed, the appliance
switches off automatically. You can only use the cook-
ing time in conjunction with a heating function.
Requirement: A heating function and a temperature
must have been set.
Press
.
1.
Use the rotary selector to set the cooking time.
2.
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments.
Press
to start.
3.
a The cooking time
a Once the cooking time has elapsed, an audible sig-
nal will sound and the appliance will stop heating.
Press the
button to silence the audible signal be-
4.
fore it is due to end.
Notes
¡ When you start the Steam function , the cooking
time will not begin to count down until the set tem-
perature has been reached.
¡ If you open the appliance door while the Steam
function
is in progress, the appliance will stop.
When you close the appliance door, the timer will
not resume its countdown until the appliance has
reached the set temperature again.
Changing the cooking time
You can change the cooking time at any time.
Press
.
1.
2.
Use the rotary selector to change the cooking time.
Press
to confirm.
3.
Cancelling the cooking time
You can cancel the cooking time at any time.
Press
.
1.
Use the rotary selector to reset the cooking time to
2.
zero.
a The appliance will then abort the cooking process.
9 Dishes
You can use "Dishes" mode to very easily cook food.
The appliance will choose the optimal setting for you.
9.1 Selecting food and configuring settings
Press
.
1.
Use the rotary selector to select "Dishes".
2.
Press .
3.
Use the rotary selector to select the food you re-
4.
quire.
Press .
5.
a The display shows which shelf position and which
accessories or cookware to use.
Use
to start the operation.
6.
a The appliance guides you through the process of
applying settings for the food you have selected.
Press
to navigate through the settings.
7.
a The appliance starts to heat and the time counts
down.
12
counts down in the status bar.
Press
to confirm.
3.
8.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve good cooking results, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ A heating function and a temperature must have
been set.
¡ The cooking time must have been set.
Press
again.
1.
Press and hold
until
2.
play.
Use the rotary selector to set the end time.
3.
Press
to start.
4.
a The start time will appear on the display. The appli-
ance is in standby mode.
a Once the start time has been reached, the appli-
ance will start heating and the cooking time will start
counting down.
a Once the cooking time has elapsed, an audible sig-
nal will sound. The time shown on the display will be
zero.
Press the
button to silence the audible signal be-
5.
fore it is due to end.
Correcting or cancelling the end time
You cannot change the end time while the appliance is
in operation.
Press
to switch the appliance off.
1.
a The settings will now be deleted.
If necessary, press
2.
and then select new settings.
a The displayed cooking time may change during the
first few minutes, as the heat-up time depends on
the temperature of the ingredients and the water,
amongst other things.
a Once the set cooking time has elapsed, an audible
signal sounds and the appliance stops heating.
Press the
button to silence the audible signal be-
8.
fore it is due to end.
Once the cooking time has elapsed:
9.
Press
to end the audible signal early.
‒
For some dishes, you can extend the cooking
‒
time if necessary.
→ "Extending the cooking time", Page 13
When the dish is ready, press
‒
appliance off.
"End" appears on the dis-
to switch on the appliance
to switch the
Advertisement
Table of Contents
