cytiva Ettan IPGphor Cup Loading Manifold User Manual page 9

Electrode assembly
The movable electrodes, as shown below, can be placed along the manifold to fit the
various length of Immobiline Dry Strip. Electrode pins make electrical contact with the
power supply pads on the bed of the Ettan IPGphor. The electrodes have a platinum
wire that is strung across the bottom of the electrode teeth to provide electrical
contact to the IPG strips. The hold down teeth are found along the opposite length of
the electrode. They are used to apply pressure on the paper bridges when the manifold
is used for bridge loading. Cams on the sides of the electrode secure the electrodes in
place and must be in the closed position during IEF.
Ettan IPGphor User Manual 11003460 AE
forcep wells
channel
numbering
hold down
teeth
cam in closed
position
cam in open
position
electrode
teeth
2 Description
2.1 Overview
centering
protrusion
9