cytiva Ettan IPGphor Cup Loading Manifold User Manual page 18

3 Operation
3.1 Instructions
Step
2
3
18
Action
Place the wicks on the IPG strips such that one end of the wick overlaps the
end of the gel on the IPG strip, as shown in figure below. The electrode must
contact the wick.
With the electrode cams in the open position, place the electrode assembly
on top of all the wicks. Swivel the cams into the closed position under the
external lip of the tray. The electrodes should not be moved while the cams
are in the closed position, see figure below.
Electrode
Paper wick
Cup
IPG Strip
Ettan IPGphor User Manual 11003460 AE