4.0 Opc-Ua Viewer - Bordignon DTAP 1 Instruction Manual

Direct Drive tapping unit with touch screen multiple control panel

4.0 OPC-UA viewer

DTAP 4.0
DTAP 4.0
The OPC-UA-VIEWER is a program that allows a real time monitoring of the threading in progress. To use this function ,
type Name, IP address and Serial No. in the home screen of the supplied program (Fig. 13)
FIG. 13
Once the fields have been filled in, press "Save". The panels that have been entered can be now be selected from the
"Machines List" drop-down menu
This program allows to save the information (Name, IP address and Serial n.)of more than one panel. Panels must have
names different one from the other
To cancel the information that refers to a panel, select the panel from "Machines list" drop-down menu and tap "Delete".
To make a real time monitoring of a panel being selected from "Machines list" menu, tap "Connect". A page will then open
displaying in real time a list of the last 100 threads being performed (Fig. 14).
FIG. 14
For monitoring more than one machine at the same time, go back to the main screen and select (or enter) the panel to be
monitored. Then press "Connect" and a new page as the previous one will open
23