Table of Contents
Advertisement
en | 22 | DAS 3000 S20
4712009-07_shd
2
1
3
(1) Wheel holder (CTA 100-x) on right front wheel
(2) Wheel holder (CTA 100-x) on left rear wheel
(3) DAS 3000 S20
Step 2 – Place the DAS 3000 S20 in the required posi‐
tion: to do this, attach the wheel holder attached to the
right front wheel to the right rear wheel. Use
Bosch ADAS Positioning to place the DAS 3000 S20 in
the required position.
4712009-08_shd
1
2
3
(1) Wheel holder (CTA 100-x) on right rear wheel
(2) Wheel holder (CTA 100-x) on left rear wheel
(3) DAS 3000 S20
---
Positioning in front of the vehicle using the bumper
as a reference point
Step 1 – Position the DAS 3000 S20 at the required dis‐
tance: to do this, attach the wheel holders (CTA 100-x)
to the left and right rear wheels. Attach the contact
plate (CTA 104-x) to the DAS 3000 S20. The
DAS 3000 S20 must be moved all the way to the bump‐
er so the contact plate (CTA 104-x) touches the bump‐
er.
1 689 989 485 | 2020-08-01
4712009-09_shd
1
2
3
4
(1) Wheel holder (CTA 100-x) on right rear wheel
(2) Wheel holder (CTA 100-x) on left rear wheel
(3) Contact plate (CTA 104-x) on DAS 3000 S20
(4) DAS 3000 S20
Step 2 – Use Bosch ADAS Positioning to place the
DAS 3000 S20 in the required position.
4712009-10_shd
1
2
3
4
(1) Wheel holder (CTA 100-x) on right rear wheel
(2) Wheel holder (CTA 100-x) on left rear wheel
(3) Contact plate (CTA 104-x) on DAS 3000 S20
(4) DAS 3000 S20
---
4.
Initial commissioning
---Separator---
4.1
Remove the DAS 3000 S20 from the
pallet
We recommend that two people remove the
DAS 3000 S20 from the pallet.
We recommend attaching the required compo‐
nents at the installation site of the
DAS 3000 S20. Maneuvering the pallet to the in‐
stallation site of the DAS 3000 S20 is safer and
easier without the components attached.
1. Remove all loose components from the pallet.
2. Remove all loose components in the trolley from the
DAS 3000 S20.
3. Unscrew the camera beam from the frame.
The DAS 3000 S20 is secured on the back by a
mounting bracket (3). The DAS 3000 S20 is se‐
cured on the front by a screw (5).
Robert Bosch GmbH
Advertisement
Table of Contents
