Table of Contents
Advertisement
FOLDING INSTRUCTION
FIGURE C
CAUTION:
After the sliding tube is
folded up, ensure to lock it
in place to avoid falling and
causing injury.
As shown in the above figure, when the product is not used, the sliding tube can be fold up to save
space. The operation is as follows:
1. Unscrew the knob (63) and the flat washer (37), remove the hanging ring bolt (10), and turn the sliding
tube (4) to a vertical angle. (The seat cushion slides down when the slide tube is folded up) As the
Figure C above.
2. When the sliding tube (4) rotates to a vertical angle, insert the hanging ring bolt (10) into the hole and
fix it. Screw the Knob (63) and flat washer (37) onto the sliding tube, as shown in Figure D above.
3. The folding step is completed.
57
4
63
37
10
4
57
37
63
10
FIGURE D
CAUTION:
The seat cushion will
slide down when the
sliding tube is folded.
ASSEMBLY INSTRUCTIONS |
13
Advertisement
Table of Contents
