Care Instructions - LifeSpan ROWER-445 User Manual

II. CARE INSTRUCTIONS
• Lubricate moving joints with grease after periods of usage.
• Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects.
• The machine can be kept clean by wiping it down using dry cloth.
• All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and other
moving parts. Failure to do so may cause damage to your thread and void your warranty.
• Keep the rowing machine in a clean dry place.
• Grasp the frame to move the rowing machine. Do not use the seat to move it. The seat will move, and
it may hurt your hand and fingers.
• Always make sure all the nuts and bolts are properly tightened.
• Regular inspection is required. Replace any worn or damaged parts immediately.
BATTERY USAGE
• Batteries are to be installed or replaced by adult only.
• Do not use rechargeable batteries. Do not mix
different battery types. Do not mix old and new
batteries. Do not mix alkaline, standard (Carbon-
Zinc), or rechargeable (Nickel-Cadmium) batteries.
• Remove batteries when product is not in use.
• Remove exhausted batteries from product and
dispose of in accordance with the
manufacturer's recommendation.
• Do not attempt to recharge non-rechargeable
batteries.
• Batteries are to be inserted with correct polarity.
• The supply terminals are not to be short-circuited.
• Do not dispose of batteries in fire, batteries may
explode or leak.
4 | IMPORTANT SAFETY INSTRUCTIONS