Felix printers Pro Series How-To page 4
How to print a vase / spiral contour repetier-host for felixprinters
Hide thumbs
Also See for Pro Series:
- User manual (51 pages) ,
- Quick start manual (48 pages) ,
- Troubleshooting manual (21 pages)
Advertisement
Introduction
How To print a vase / spiral contour
3
11 June 2016
5. Now load the object and make sure you selected the correct print-configuration which you just
saved. press slice. Note that it is not possible to have the spiral contour with two objects.
2
1
Sliced object:
Note the large amount of layers. This is a bug in the software. It takes almost each line segment as a
separate layer because it is not able to distinguish the layers in spiral mode.
6. Reduce the flowrate to 50% and press print
www.FELIXprinters.com
FELIX Pro 1
Advertisement
