Introduction
1 Introduction
In some cases it is desired to make a watertight object. A vase for instance is a good example. There is a
feature called spiralizer contour. This function only prints the outside contour of an object, and does this in a
single spiral. So there are no distinct layers.
This tutorial shows you how to print a spiral contour in repetier-host with cura slicer.
1. Start Repetier-Host.
2. Goto slicing settings, select CuraEngine and press configuration.
FELIX Pro 1
How To print a vase / spiral contour
www.FELIXprinters.com
1
11 June 2016