Table of Contents
Advertisement
10 | Onboarding Lyve Rack R1
To start using the system, you need to complete the onboarding process to set up the system and
must configure the following:
Title
Step
1
Create administrator account
2
Upload SSL certificate
3
Configure DNS resolver settings
4
Configure network time protocol settings
5
Configure notifications
6
Verify configurations
The CORTX Manager web interface allows the Appliance to be configured. To access the CORTX Manager
web interface using a web browser, go to https://<MANAGEMENT_VIP>:28100/#/preboarding/welcome
10.1 | Configuring admin user
This procedure creates following two users, but with same credentials.
1. CORTX Manager admin user
2. Linux user
You can create users mentioned above only once, while setting up the system. The CORTX Manager
admin user has all the permissions of the CORTX Manager. To log in to the system using SSH, you
must use the credentials of the Linux user.
Note
Username field in CORTX Manager is not case sensitive.
SSH login field is case sensitive.
Changing CORTX Manager admin user password will not have any impact on Linux
user credentials and vice versa.
To create an admin user:
1. In the Admin Username box, enter a
2. Enter Password and Confirm password, and then click Apply and continue.
You must log in with the admin user and password to continue onboarding configuration.
Topic link
10.1 | Configuring admin user
10.2 | Uploading SSL certificate
10.3 | Configuring DNS resolver settings
10.4 | Configuring network time protocol
10.5 | Configuring notifications
10.6 | Verifying onboarding configuration
username.
41
Lyve Rack R1 Installation Guide
Advertisement
Table of Contents
