Appendix
Initial configuration of the Lyve Rack R1
sudo sh /opt/seagate/cortx/provisioner/cli/factory_ops/unboxing/init -C
172.16.8.3 -M 10.235.168.101
1. DHCP
2. Static
3. Quit
Choose a network configuration for management network: 1
1 selected. Proceeding with DHCP configuration for Management Network.
===============================================================
Setting Management Network to DHCP
===============================================================
You have selected to proceed with DHCP based configuration for management network interface.
Do you wish to proceed? (y/n): y
Preparing cluster pillar for setting management network configuration to DHCP.
===============================================================
Setting Public Data Network to DHCP
===============================================================
You have selected to proceed with DHCP based configuration for public data network interface.
Do you wish to proceed? (y/n): y
Preparing cluster pillar for setting public data network configuration to DHCP.
Using DHCP configuration
44
Lyve Rack R1 Installation Guide