Seagate Lyve Rack R1 Installation Manual page 55

******************* Please Run next steps manually ************************
1. Check if all IP addresses are assigned as expected
$ sudo ip a
NOTE: run this on both servers.
2. Check if system has been assigned a hostname:
$ sudo salt '*' cmd.run hostname
NOTE: run this from Server A (Primary server)
3. Check if Cortx cluster is up and all services are Started, run:
$ sudo pcs status
$ sudo pcs status
NOTE: All the resources/services should be listed as started.
************************* SUCCESS!!! **************************************
Lyve Drive Rack Cortx cluster is successfully initialized!!
***************************************************************************
Lyve Rack R1 Installation Guide
50