Setting The Ring Volume; Setting The Beeper Volume - Brother MFC-640CW User Manual

Setting the Ring Volume

You can turn the ring Off or you can select the ring volume level.
1
Menu/Set
Press
2
Press or
▲
Menu/Set
Press
3
Stop/Exit
Press
—OR—
You can adjust the ring volume when your machine is idle (not being
used). In Fax mode
level. Every time you press these keys, the machine will ring so you
can hear the active setting as the LCD shows it. The volume changes
with each key press. The new setting will stay until you change it
again.

Setting the Beeper Volume

You can change the beeper volume. The default (factory) setting is
Low. When the beeper is on, the machine will beep when you press
a key, make a mistake or after you send or receive a fax.
1
Menu/Set
Press
2
Press or
▲
(Low, Med, High or Off)
Menu/Set
Press
3
Stop/Exit
Press
1 4 1
, , , .
to select Low, Med, High or Off.
▼
.
.
, press
1 4 2
, , , .
to select your option.
▼
.
.
or to adjust the volume
GETTING STARTED 2 - 6