Speed-Dialling
Search/Speed Dial
Press
number. (See Storing Speed-Dial numbers on page 5-1.)
If the LCD shows Not Registered when you enter the
Speed-Dial number, a number has not been stored for it.
Search
You can search for names you have stored in the Speed-Dial
memory. Press
search. (See Storing Speed-Dial numbers on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause
again. If you want to make a second call to the last number dialled,
you can save time by pressing
Colour Start
.
Redial/Pause
If you are sending a fax automatically and the line is busy, the
machine will automatically redial up to three times at five minute
intervals.
#
,
, and then the two digit Speed-Dial
Search/Speed Dial
, and then press
only works if you dialled from the control panel.
two-digit number
and the navigation keys to
To search numerically
To search alphabetically*
Mono Start
or
Redial/Pause
or
Colour Start
to try
Mono Start
and
SETUP SEND 3 - 2
or