8668402
CV Boot Installation Tool
SPECIFICATIONS
Arm Expansion Range
Maximum Pressure
Air Hose Connector
Materials
Weight
INTRODUCTION
Install constant velocity boots (CV boots) on most cars and small commercial
vehicles with the CV Boot Installation Tool. The expanding arms are controlled
by air pressure. A standard air hose connection is required.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
2
CV Boot Installation Tool
Ø20 to 110 mm
110 PSI
1/4 in. NPT
Plastic (Polyamide 6 with glass strands) and metal.
4.6 lb (2.1 kg)
For technical questions call 1-800-665-8685
V4.0