Shift The Image In The Transaction Printing Mode - Canon Oce VarioPrint 6000+ Series Operation Manual

Shift the image in the transaction printing mode

Shift the image in the transaction printing mode
Introduction
When a misalignment occurs you can shift the image to correct the problem. You can shift the
image on the front side and back side horizontally and vertically. Examples of possible
misalignments:
• A name or address is not placed correctly in the right area.
• Lines on the front side and back side of a sheet are not aligned correctly.
To keep the shift settings for future use, you must specify the shift settings in the setup via the
Settings Editor. Each time that the setup is loaded, the shift settings included in the setup will
become the active shift settings.
NOTE
Only use the image shift function if you want to shift the image of the whole job. The image shift
applies to all the media in all the paper trays.
Procedure
1.
On the operator panel, touch [System] -> [Transaction].
2. Touch the - or + buttons to shift the image on the front side or back side of the sheet.
154 Chapter 7 - Carry out print jobs