Shift The Image Roughly To Create Binding Space - Canon Oce VarioPrint 6000+ Series Operation Manual

Shift the image roughly to create binding space

Shift the image roughly to create binding space
Introduction
If you want to create space for staples or punch holes, for example, you can use the [Align]
function. The preview in the right-hand pane of the operator panel displays the consequences of
your changes.
You can also shift the image or margin more precisely.
Procedure
1.
Touch [Jobs] -> [Waiting jobs].
2. Touch the job you want to change.
NOTE
You cannot change this setting for the active print job .
3.
Touch [Properties], or touch the job twice to open the [Properties] window.
4.
Touch the [Align] button.
5.
Make the required changes.
6. Press [OK].
7. Press [OK].
122 Chapter 7 - Carry out print jobs