Table of Contents
Advertisement
Disable the warning time
Introduction
When operator interaction is required now or soon, the dashboard and the operator attention
light warn you. However, you can disable this warning function.
[16] Disable the warning time
Procedure
1.
Touch [System] -> [Setup] -> [Warning time] (under [Operator panel]).
When the box for [Warning in advance] has a check mark and states [On], the function is enabled.
2.
Touch the [Warning in advance] button.
The check mark disappears. The status [On] changes into [Off].
3.
Press [OK].
Chapter 5 - Adapt printer settings to your needs
Disable the warning time
45
Advertisement
Table of Contents
Troubleshooting
