Canon Oce VarioPrint 6000+ Series Operation Manual page 94

Description of the print job settings
Setting
[Zoom]
[Align]
94 Chapter 7 - Carry out print jobs
Values Description
[Fit to page] You can select a media size for the output that differs from
the media size of the original. When the [Fit to page] setting
is enabled, the system scales the original in such a way that
the image fits on the selected media size of the output.
[Percent] Use this setting to change the zoom manually within the
range 25% to 400%.
An image on a sheet may be smaller than the media size of
the output, for example because you scaled the image to
70% of its original size. The [Align] setting allows you to in-
[Top left]
dicate the position of the image on the sheet. [Top left]
moves the image to the upper left corner of the sheet.
[Top center] moves the image to the center at the top of the
sheet.
[Top center]
[Top right] moves the image to the upper right corner of the
sheet.
[Top right]
[Center left] moves the image to center of the left side of the
sheet.
[Center left]
[Center] moves the image to the center of the sheet.
[Center]
[Center right] moves the image to the center of the right side
of the sheet.
[Center right]
[Bottom left] moves the image to the lower left corner of the
sheet.
[Bottom left]
[Bottom center] moves the image to the center of the bottom
side of the sheet.
[Bottom center]
[Bottom right] moves the image to the lower right corner of
the sheet.
[Bottom right]
4