Delete Print Jobs - Canon Oce VarioPrint 6000+ Series Operation Manual

Delete print jobs

Locations from which jobs can be deleted
You can delete jobs from the following locations.
• List of [Printed jobs] (if this function is enabled in the Settings Editor).
• List of [Scheduled jobs].
• List of [Waiting jobs].
NOTE
You can only delete the active print job
hold. If necessary, press the Stop button
Select the jobs you want to delete
The table below describes your options to select one or more jobs.
Select one or more jobs that you want to delete
What to delete?
One or more separate jobs
All jobs
[Jobs with available media] Go to the correct location, then touch [Select] -> [Jobs with availa-
[Jobs with label]
NOTE
For the list of [Printed jobs], you can indicate in the Settings Editor that the list must be cleaned
automatically at specified times. The factory default is 1 day. Furthermore, in the Settings Editor
you can manually clean up the jobs in the lists of [Printed jobs], [Scheduled jobs] and [Waiting
jobs].
Procedure
1.
Go to one of the following locations.
• Touch [Jobs] -> [Queues]
If collapsed, first touch
• Touch [Jobs] -> [Printed jobs]
2.
Select the jobs you want to delete.
3. Press [Delete].
A message appears.
4. When you are sure that you want to delete the selected job(s), touch [Yes].
in the list of [Scheduled jobs] when the printer is on
2x to put the printer on hold.
How to do?
Go to the correct location described above, then touch the jobs
one by one.
Go to the correct location, then touch [Select] -> [All].
ble media].
Go to the correct location, then touch [Select] -> [Jobs with label].
to expand the list of [Scheduled jobs] or [Waiting jobs].
Delete print jobs
Chapter 7 - Carry out print jobs 103