Maintenance - Technogym SKILLBIKE User Manual

MAINTENANCE

The product should always be kept clean and free of dust, in compliance with common health and
hygiene standards.
After every use, clean the product with a damp sponge and neutral soap to remove moisture and
perspiration, then dry it well.
Clean and dry the whole product every day. Put the saddle and the handlebar into their highest
positions so that you can clean the full length of the post and stem respectively. Remove dust from
the grill (A) carefully.
B
Do not use chemical products or solvents.
Contact the Technogym Technical Support Service for information about any maintenance operations
not described in this manual.
The safety of the product is assured only on the condition that it is carefully inspected once a week
for any signs of damage and/or wear. Either replace defective or worn components immediately, or
remove the equipment from service.
Ensure that you remove the power plug from the socket before carrying out any maintenance
procedures.
If you suspect that the watt power you are producing does not correspond to the measurement on the
console, proceed to calibrate the torque flange and the belt. See the console manual for calibration
instructions.
19
SKILLBIKE