Routine Maintenance - Technogym Bike Excite Live User Manual

Routine maintenance

WARNINGS
The safety of the product is assured only on the condition that it is carefully inspected every two weeks for any signs of damage and/or wear. Replace
defective or worn components immediately, or remove the product from service.
If used for medical purposes, disinfect the hand sensors after each use.
Contact the Technogym Technical Support Service for information about any maintenance operations not described in this manual.
Cleaning
The product should always be kept clean and free of dust, in compliance with common health and hygiene standards.
To clean the display, proceed as follows:
- Turn off the product by pressing the main switch to the "0" position (in mains powered model).
- Take the product's power plug out of the wall socket (in mains powered model).
- Clean the display using a damp (not wet) cloth.
Clean the entire product once a week.
- Turn off the product by pressing the main switch to the "0"
- Take the product's power plug out of the wall socket
- Clean outer parts with a damp sponge.
Do not use chemical products or solvents.
Take care not to wipe the display and labels too aggressively.
BIKE EXCITE LIVE
position (in mains powered model).
(in mains powered model).
22