Question
I hear noise on the cordless handset and the
keys do not work.
Common cure for electronic equipment.
Suggestions
• Make sure the Cat-5 network cable is
plugged in correctly and securely.
• Unplug the Cat-5 network cable. Wait for
15 seconds before plugging it back in.
• If the telephone is not responding
normally, put the cordless handset in the
handset charger. If it does not fix the
problem, try the following (in the order
listed):
1. Disconnect the power to the base station.
2. Disconnect the battery on the cordless
handset.
3. Wait a few minutes before connecting
power to the base station.
4. Install the battery again and then place the
cordless handset in the handset charger.
5. Wait for the cordless handset to synchronize
with the base station. Allow up to one
minute for this to take place.
EN - 26