Palazzetti WT60 3D N16 Installation, Use And Maintenance Manual page 90

4) Accompany the door until it is completely
closed.
5) Push lever (B and return it to the locked posi-
tion (Fig. 46).
B
6) Proceed in the same way with the door on
the opposite side.
11.6 Cleaning of cements and smoke
deflectors
Before carrying out any maintenance operation,
check that there are no burning embers.
Encrustations and deposits on the deflectors and
on the back of the refractory panels can compro-
mise the correct functioning and duration of the
appliance.
To clean the parts and the appliance properly,
use a simple brush or ash vacuum cleaner.
For cleaning it is necessary to perform the follow-
ing operations:
1) Open the door (A) by pushing it upwards.
90
A
Fig. 45
2) Lift and extract the combustion air deflectors
(B), the grate (C) and the ash drawer (D) (Fig.
48).
Fig. 46
B
C
D
3) Lift and extract the refractory brick bases (E,
F, G, H) from the base in order and vacuum
out any ash deposited in the compartments
below (Fig. 49).
Fig. 47
Fig. 48
004778610 - 16/12/2020