Subzero Firmware Menus - Elstat Nexo CMS200 Product Manual

Product Manual, Issue 6
3.3 SubZero Firmware menus
The table below describes the controller SubZero firmware Main menu. Use the Up or Down buttons to
scroll through the menu and the Set button to select.
Menu
Parameter list
Test routine
Faults
Half reset
Full reset
Data dump
Display
Displays the parameters and the parameter values.
Enters the test routine that tests the relays, temperature
sensors, door switch, and motion sensor.
Displays the last three faults (alarms).
Clears the self-learning matrix.
Resets the parameters settings to the global default values and
clears the self-learning matrix and statistics.
Elstat use only.
Downloads data from the controller to a computer for analysis.
Elstat use only.
Page 22
Description
www.nexo.com
CMS200